[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Bently help

On Nov 16,  1:07pm, STEADIRIC@aol.com wrote:
> Subject: Re: Bently help
> There is a small hole on the bottom of the mirror, stick a thin screwdriver
> (Flat Blade) into the hole and fish around until you feel it working on a
> retaining ring push the ring counter clockwise and you will release the
> mirror from the housing.
> It's a real bitch but it can be done.
> Eric Fletcher
> '81 Coupe w/335,000 and climbing!
> '87 5000CS Turbo Quattro
>-- End of excerpt from STEADIRIC@aol.com

Does the ring actually come off? If so, is it the sort of thing that can be put
back on while the mirror is out of the housing? Or does it just turn and have
to be reinstalled in the opposite manner?

Thanks for the info.
-- Rob

| Rob Reesor            | Teknekron Software Systems    |
| reesor@tss.com        | 530 Lytton Ave., Ste 301      |
| 415/617-2217          | Palo Alto, CA  94301          |