Re: 86 won't start

[PDQSHIP@aol.com]

May want to check to see if the FI dist flap is stuck...  If it is you can
free it by hand ...  Then go after vacuum, specifically the T at the top of
the valve cover for the pcv...  Next make sure that you're dist cap is clean,
tend to get corroded...  Next make sure you have fuel (I'm guessing you cked
this), check the lines to make sure they're not leaking...  Make sure you
have spark (again assuming done)...  The only other thing might be the fuel
injector O-rings could be bad, but would think the car would start at least.

My .02

Scott