Re: Replacing radio

[jdouglas@mitre.org (jason douglas)]

>, Audi used a color coding scheme like green solid/green-and-white 
>stripe go the same speaker.  If you're not sure, connect 1 speaker at a time 
>until you've id'd them all.  I used white tape to label them for future use.

my '86 used the same color code system.  its a little easier to identify
which speaker
wire goes to which speaker by using a battery (1.5 volts is good).  
------------------------------------------------------
Jason Douglas
MTS Dept G057                        
MITRE Corporation