Slow down big guy, ned didn't get that gouge..... He gets 20 for the
wastegate spring perch, that's it, yer on yer own for the rest.... The
problem is that the perch uses a 70mm threaded bolt with about a 1/2 inch
lathed end that the perch plugs on to. So you need to get a die to cut the
threads (full bolt length) and a lathe to mill the tip... I paid 60 to have
all that done, but the engineering shop said that, I might as well do a bunch
once the setup is done, and the 30.00 comes to mind as the hit, but I wasn't
on the net then, so......