[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Bumping cam on a NA 2.2?

On Fri, 22 Sep 1995 AUDIDUDI@delphi.com wrote:

> I know it well, having bought one ($350 back then) for my 4-cyl 4000 several
> years ago.  Since the distributor is driven off the back of the cam, I don't
> think you'd want to use one of these on a 5-cyl. motor otherwise you'll vary
> the ignition timing along with the cam timing (at least on an NA car such as
> my '87 5k) and that can't be a good thing.

	I was thinking that this centrifugal cam gear might be the hot 
ticket, but, you're right, it would screw up the distributor timing.  I 
guess it's time to install a crank triggered ignition with separate coils 
on each plug (ala 20V cars).  Maybe I'll do this when I do the EFI 

Graydon D. Stuckey										
'86 Audi 5000 CS Turbo Quattro, GDS Racing Stage II				
'83 Mazda RX7 w/13B, GDS Racing Stage 58474