[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: O2 sensor test and baaS mailing list address

On Sun, 8 Oct 1995, Paul Rivera wrote:

> I have found that using a Digital Voltmeter and measuring
> the output voltage seems to work. .5V should be optimum mixture.

A little note, when testing O2 sensors, make sure you measure the voltage 
and not the resistance.  The resistance test sends a small current 
through the line and can kill the sensor.  As long as you're measuring 
output of volts, you are safe.

Robert Phillips
The University of Akron Sociology Department-------Akron, Ohio
1987 Audi 4000S, 1.8L 4-cyl, FWD-----SOLO II D-Street Prepared