[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: block heater
>So time to talk about block heaters.
Assuming my audi has one ('86 5KCS), where would it be located at? I
looked all over the engine compartment and couldn't find one. Next
question, any particular model work better than others? How hard is it
The block heater is installed in place of the center freeze plug of
the engine on the passenger side. I bought mine from a dealer. It is
a 400 watt immersion heater that replaces a freeze plug. The plug is
not too bad to remove. I drilled several holes into it and pryed it
out with a cold chisel. A slide hammer dent puller may work well also.
- block heater
- From: Mike Myers <firstname.lastname@example.org>