[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Procedure for compression test
> Slight modification.... disconnect coil wire AT DISTRIBUTOR. Otherwise
> the coil will still put out, but arc to itself and destroy it.
That's what I meant, though I don't follow your logic here.
> I dont think you want to ground it either, Full fielding a coil isnt good
> either. better off letting it hang, or keeping it near something to
> dissipate the spark.
Bentley says to ground the wire.
| Dan |
Dan Simoes firstname.lastname@example.org
100 Clearbrook Road (914) 789-5378 (voice)
Elmsford, NY 10523 (914) 789-5310 (fax)