Re: Anti-roll bars for 4000Q

[Bruce Bell <bbell@csn.org>]

At 10:47 PM 2/12/96 -0500, you wrote:
>Dear Quattrophiles-
>
>I am writing to find out about experiences with changing the anti-roll
>bars on a 4000 quattro.
>
>I would like to use a larger bar up front, and install a small bar in the
>rear.  My purpose is to reduce body roll while cornering, and dial out
>most of the understeer.
>

Mason - I think you are going in the wrong direction. Doing the above should
increase understeer - not reduce it.

Bruce Bell
bbell@csn.net