[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Wheel studs

At 08:18 PM 02.13.96 MST, Perci Hala & Sandra Krystalowich wrote:

>PS.The best solution, other than the obvious above, is the plastic
>stud that comes in the tool kit of the S4. Especially when you
>discover that the rear hubs don't lock to the rotors and if they
>rotate when you take the wheel off its a PITA! 

that little plastic stud also comes with my '91 200q.
as for the rear hubs not locking to the rotors, h*ll, the fronts on my '91
(and '87 4kcsq) don't lock to the rotors.  definitely a PITA.
* linus toy           email:  linust@interramp.com                   *
*                                                                    *
* "...it's stuff that does things people want, but they don't know   *
*     how it works.  But if they did look inside it would probably   *
*     have lots of wires."                                           *
*                            --4 year old explaining 'technology'    *