[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Brake pad warning light

At 12:30 PM 2/22/96 EST, you wrote:

>So far I just unplugged the connectors on both left and
>right fronts.  Light still on.
>un-spliced the wires on both sides.  Light still on.
>Anybody got the wiring for this circuit in a Bentley ?
>I thought the way this thing worked was when the pads
>wear enough to short the two wires together on the disk
>it completed the circuit and the light came on.  But from my 
>test so far that doesn't appear to be the case or there is 
>something I'm missing here.
>Any ideas ?  The warning light is starting to get really annoying :-(
Same problem on my 87 5KCSTQ - can't figure it out...  Next for me is to
head for the Kostal connector, then to the computer behind the dash... (far
down my list right now, I'm afraid.
********************************AUDI FAN******************************
EMCM(SW) Dave Head
87 5KCSTQ 170K miles and counting...
1.8 bar boost - @ 1.3 the shuttle launches
Maitland FL