[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
RE: Antenna research & GreenLee
Don't foget that you need access to both sides of surface to use a greenlee tool.
From: Orin Eman[SMTP:email@example.com]
Sent: Thursday, March 07, 1996 6:25 PM
To: John Shuman
Subject: Re: Antenna research & GreenLee
> GreenLee IS just what you want. They are a bit pricey but,
> they are worth it. They can be had from ANY electrical supply
> house and should be purchasable either by the size or vairous
> kits of vairous sizes. I just bought a two size kit, 1 1/2" &
> 2" and also a 3/8" for 108.00 us. Not to bad. Anyway, one thing
> to keep in mind, they are obivously SAE sizes and they come in
> conduit sizes. i.e. 1/2" - 3/4" - 1" -etc.
Mouser Electronics carry punches too (800 346 6873). The only Greenlee
I noticed were for D-Connector shaped holes, all > $300!. They do have
another range which start at $17 for 12.5mm (~1/2") to $161 for 75.0mm.
(There were some imperial sizes too.)
Anyway, FYI, I have no connection with Mouser other than being on their
catalog mailing list.