[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Blown out Oil Spray Jet

 The replacement head I purchased is in excellent shape except for being damn
dirty and a problem with the oil spray jet  for the cam. Some how the oil jet
was forced out, got lodged sideways between the cam and started to get eaten
away by a cam lobe. Fortunately, the cam is fine because the oil jet is brass.
My question is how can I be confident that the new oil jet will stay in? Is
their a special tool to pound these things in. My plan was to heat the head,
cool the oil spray jet, then pound it in. What do you think?

Brett Augsburger
86 5000cstq