[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Ur-Q M mount HW & subframe bushings???

Having a *LOT* of fun trying to find all the pieces-parts for the KUQEFH install!

The Audi Quattro 82-87 fiche dated 1-91 shows two different bushngs for the front subframe:

item #2 857 199 415 B rubber mounting 2x  (front two)
item #3 857 199 419 B rubber mounting 2x  (rear two)

Anyone know fer sure if these suckers are really different? Just diff stiffness of the rubber - same idea as m mounts that look identical but have a R&L location?

Also, I cannot find the front balljoint-to-strut retaining bolts & nuts anywhere - anyone know the correct FICHE PIC # for these suckers? These bolts can/do corrode and break and it's a real bummer (I know - BTDT) when this bolt snaps and falls out and the balljoint separates from the strut at speed.....     :(

Also, FICHE PIC #21 shows the motor mounts - but just the old 'sealed in aluminum' type - the replacements I have are the new 'open' or 'exposed' type - they look like big trans mounts - these new ones need a special HW kit including 'stops' and a heat sheild for the turbo-side m mount - anyone have any ideas on P/Ns and/or sources for the required conversion HW kits for the new type m mounts?

Also, some of the items depicted in the FICHE PICS have item or 'FIG.' numbers - but no part numbers are listed, like the WC turbo water supply line that I need on FICHE PIC #20 - the part is there, item or FIG. #25 - but NO part number....what gives? You sposed to look elsewhere on the fiche for these P/Ns?