A4, A6 B pillar noise

["McIntyre, Richard" <mcintyre@wsbs-mses.eng.pko.dec.com>]

I noticed a number of people complain recently about rattles, etc.,
coming from the B pillars of the A4 and A6.  Well, I had the problem
too.  I found that the lower and the upper B pillar plastic covers
make plastic-to-plastic contact mid-pillar where they meet (at least
on the A6).  My solution, which seems to have solved my problem, was
to remove the lower B pillar cover and glue felt on the plastic where
contact is made.  You can figure this out by close observation (don't
forget the points on the back).  With the felt on, they fit together
very snugly, and no more rattles over bumps.

Richard