[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

<5KCSTQ> Ignition Rotors/tuneup

Put new W7DTCs and cap (Borg Warner - made in Germany)in last night. Plugs
1, 2 had some buildup. Guesss its time to do that leakdown test... At least
they were all brown. Still misses at idle - .3 bar with AC off. Off idle, no
miss. So is it another vacuum leak?

Went to put dee rotor in - no fittee. Functionally identical except hole to
plug in too small. Back to PeeP Boys. Looked at non-turbo. Right sized hole,
but contact area on the end is only 1/2" wide. Mine (and the one that didn't
fit) is about 7/8" wide. Wanting to avoid the dreaded 2312? code, I passed
and stuck with the old one - which was in good shape.

Any ideas?
********************************AUDI FAN******************************
EMCM(SW) Dave Head (nuclear grade electrician)
87 5KCSTQ 170K miles and now counting (after $230.00 to repair...)
1.9 bar boost (charlie spring, no shim) - @ 1.3 the shuttle launches!
Maitland FL