[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: Draining 5KTQ cooling fluid

> With a COLD engine, remove the upper radiator hose. Insert a garden hose =
> into the rad and set to like medium flow rate. Run engine till clear, =
> clean water exits from the disconnected top rad hose. Try to position =
> the hose such that the exiting 'stuff' runs clear of the fan.....
> - -glen

How do you get the water out, or if you don't, do you just drain the lower hose
and then add straight coolant to the stuff that's already in there and measure
the specific gravity of it to make sure it is proper?


91 2000 q

Paul Waterloo                    TEL: (860) 267-7714
HydroAire Incorporated           FAX: (860) 267-7387
875 Old Hartford Rd
Colchester, CT  06415          EMAIL: 74543.407@compuserve.com