[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

4KcsQ Elec. Problem

If the diagnosis is right, and a slipping belt is the culpret, then
the pully's are in dire need of resurfacing, or roughing up!
When a belt slips, it will "polish" the steel pulley's to an almost 
chrome like finish!! Which will cause even a new belt to slip, 
especially when wet. Solution-- use a course grit sandpaper and rough
up both the crank and altenator pulley's. It will help the belts last 
longer(not glaze) and it wont slip as easily, (especially wet)