[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index] Fwd: 865KTQ flywheel pins
Thought the list might want this as well.... << Subj: Re: 865KTQ flywheel pins Date: 96-09-01 20:36:18 EDT From: PDQSHIP To: Wolpoff@centuryinter.net, DanS@ans.net In a message dated 96-09-01 13:40:18 EDT, you write: << Scott, I really don"t know what the idiot did. He has lied to me about everything else. He said he did not resurface the flywheel. A piece of metal that looks like it may have come from a blown up pressure plate was trapped on the CRANK side of the flywheel when I removed the cast brace-inspection cover. I only paid $2000 for this otherwise decent TQ. What do you think? Barry >> Well if he did not cut the flywheel, then he didn't remove it... If he didn't remove it, chances are very good that the pins are there..... Double ck your sensors at the flywheel, clean off the boots on the top.... Is the White booted (vs black) sensor on the bottom? IT SHOULD BE ON THE BOTTOM.... But fitment-wise they are interchangeable, ck that first.... The flywheel pins are not changeable with trans installed..... No nice way for that is there..... But Dan S has parts in the trans that shouldn't be there, maybe you can trade...... Scott >> --------------------- Forwarded message: Subj: Re: 865KTQ flywheel pins Date: 96-09-01 20:36:18 EDT From: PDQSHIP To: Wolpoff@centuryinter.net To: DanS@ans.net In a message dated 96-09-01 13:40:18 EDT, you write: << Scott, I really don"t know what the idiot did. He has lied to me about everything else. He said he did not resurface the flywheel. A piece of metal that looks like it may have come from a blown up pressure plate was trapped on the CRANK side of the flywheel when I removed the cast brace-inspection cover. I only paid $2000 for this otherwise decent TQ. What do you think? Barry >> Well if he did not cut the flywheel, then he didn't remove it... If he didn't remove it, chances are very good that the pins are there..... Double ck your sensors at the flywheel, clean off the boots on the top.... Is the White booted (vs black) sensor on the bottom? IT SHOULD BE ON THE BOTTOM.... But fitment-wise they are interchangeable, ck that first.... The flywheel pins are not changeable with trans installed..... No nice way for that is there..... But Dan S has parts in the trans that shouldn't be there, maybe you can trade...... Scott
|
