Re: Overboost problem - Hello Charlie spring users!

[orin@netcom.com (Orin Eman)]

> You should be able to get the diaphram pretty cheap, they hardly ever rip...
>  The main cause usually is the overtightening of the WG cap screws....  If
> you can get the cap as well, the plug is removable on the top and an adj
> spring preload can be fabricated....

Just did the final test - blow into the lower chamber, check for pressure
in the upper chamber...  yup, pressure in the upper chamber.

So, off to the junkyard tomorrow.

Thanks, Orin.