[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

CQ - removing dash "kick panel"

Hello again,

I was just checking the terminal plugs used to download ECU codes and noticed
two things.  First, the plastic kick panel (above pedals and below knee
bolster) is cracked by the airbag fuse access cover.  Second, the two
phillips screws holding the hood release pulley are loose.  I' need to remove
the panel to access the screws, and thought while it's off I could glue the
crack before it gets worse.

Does anyone know how to remove this panel?  It seems there is a phillips
screw on each side of the panel and a metal clip above the gas pedal.  Beyond
this I'm lost and really don't want to screw something up.

TIA for any info.


Kennon Hines
1990 Coupe Quattro
Atlanta, GA