[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Bulb burned out indicator

>Solution:  Methinks that wiring in a couple of resistors to the contacts
>would fake the Audi Gods into believing that the bulb filaments on the
>driver's side are *good*.  Any one know what ohmage I'd need.  Probably have
>to wire to the three-prong plug two resistors--one for high beams and one
>for lows. 

Bzzzztttttt.....  You connect BOTH head light leads to the relays......


Eric Fletcher
St. Louis, MO