[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index] Re: Tightening Crank Bolt
On Wed, 2 Oct 1996, mike tipton wrote: > Ok so I've shot down the Rope-a-dope theory! > > So we ask: How does one go about tightening, the crank bolt? ... > belt change. I used a spare tranny mount bolt, inserted thru the round > hole in the side of the tranny, lined up the flywheel, inserted the bolt > as far as it would go, and removed the crank bolt, and reinstalled with > zero problems! OK, I don't agree with your assessment of the rope trick, but this bolt trick is easier anyway. Next time, I'll try that. Thanks. Later, ---------------------------------------------------------- Graydon D. Stuckey '85 Mazda RX7 GS, no toys graydon@apollo.gmi.edu '86 Audi 5000 CS Turbo Quattro, has toys Flint, Michigan USA '89 Thunderbird SC, lotsa toys
|
