Orin found the MAC11 Boost Control Map! YAHOO!

[scott.john.mockry@bangate1.tek.com]

Orin,

Congratulations on cracking the MAC11 ECU Boost map code! 

Using your info I found that the later MAC14 ECU uses similar code in a different
location to control the boost with the WG solenoid. I tested it out last night..............

WOW! 

The computer  controlled WG gives a NICE overboost peak up to 2.0 bar for a
 second  at 2800-3200 RPM and then  brings the boost back down to the preset
1.85 bar value.  I am running a stiffer spring and you can adjust the amount 
of overboost  by increasing/decreasing  the WG spring tension along with changing 
the ECU boost map values. High Altitude running may over-rev the K24 turbo
so I need to come up with a mod to reduce the boost when cruising up in
the Mountains.

This is serious fun!
Good Job! and many thanks for all your hard work
Scott M.