[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Frank J. Bauer
dassault systemes of America email:email@example.com
Subject: fred's axlenet
> Has anyone dealt with Fred's Axlenet on the net?
i just surfed the site the other night - prices look good.
let us know how it works out.
> I need to adjust the linkage though as 1,2,3 will
> not engage. Do you really need the special Audi tool to
> adjust this?
i have done this on my GLI without the tool.
my theory is that if it is adjusted so that reverse engages properly, then
the other gears should fall into place.
you should be able to do this with one person in the car and another underneath
to tighten the bolts when it is positioned correctly. it may take 2 or 3 tries
to get it right. the trick is to position the lever relative to the reverse
lockout slot (there should be a nylon stub on the lever that passes through
the slot when you push down then right.) then you need to get the correct
left/right location for the lever at rest. this location will allow you to
engage reverse when you pull back after you push down then right.