[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Coupe n/a sway bars

Try ADDCO in Lake Park, Florida. Call John Carlson at 561-844-7881. He does
all their R&D and custom made some bars (F&R) for my 90Q20V. The Coupe's are
probably not much different? Note they do not have "off the shelf" bars for
Audis so you will probably have to send them the OEM ones in order to copy
all the bends, etc.

Since mine was the first Audi Q he had worked on, he was willing to do some
experimenting. They did not have any Urethane bushings that would fit the
stock brackets so had to make my own and adapt the brackets.

Net result, the car handles a lot better now but probably too stiff for
rapidly deteriorating roads in this country.

Good luck,