[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Sparco 4k/4kq/Coupe strut brace photo...

Do they make one for like a 92' 100 V6? I toyed with the idea of getting 
the strut brace from and S6 since it is the same bodystyle but it 
involves the changing of brake master cylinder and brake reservoir since the 
cap from the brake reservoir is the way, the S6 has one with the cap 
offset towards the firewall. The master cylinder is probably different 
since the S6 brakes are hydraulic assisted and probably use hydraulic 
assisted servo and my V6 is vacuum assisted servo. 

Anthony Chan, First Hill, Seattle, WA, USA.
92' 100 V6 Tornado Red.

On Sat, 9 Nov 1996 AUDIDUDI@delphi.com wrote:

> Date: Sat, 09 Nov 1996 08:37:36 -0500 (EST)
> From: AUDIDUDI@delphi.com
> To: QUATTRO@coimbra.ans.net
> Subject: Sparco 4k/4kq/Coupe strut brace photo...
> I've posted a photo of the Sparco strut brace for the 4k/4kq/Coupe on my Web
> page for those who are interested: http://people.delphi.com/audidudi then go
> to the "Odds-n-Ends" page.
> I have seen one that was purchased from TAP recently and it appears they are
> now using round tubing instead of the oval shape used on mine.  BTW, they're
> shipped undrilled so you have to figure out where to put the mounting holes.
> Otherwise, a very nice (and VERY light!) piece...
>      _             _             
>     / l       l o l  \       l o   Jeffrey Goggin
>    /__l l l / l l l  l l l / l l   AudiDudi@delphi.com
>   /   l l_l \_l l l__/ l_l \_l l   http://people.delphi.com/AudiDudi