[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Unsoldering EPROMs

We now have a few people able to unsolder the EPROMs in the MAC11B
computers (5kCSQs).  Once the EPROM is unsoldered and a socket installed,
then it is easy to put in an EPROM which has the stock boost limit

For Charlie Smith spring users who have grounded their fuel pump relay,
this would regain the safety feature of cutting the fuel pump if for
example, the wastegate diaphragm should rip and allow engine killing
overboost!  Highly recommended (saved my engine several times)!!!

I expect this service will cost in the $50 to $100 range.  Cheap insurance
against blowing your engine.

I personally am NOT doing this, but I'll pass on requests to those who