Re: help, moron installed stereo in CQ (bypass rear amp?)

[Alexei M Voloshin <Alexei.M.Voloshin-1@tc.umn.edu>]

Have you tried istalling a radio noise condenser?? .1 Farad at 16 VDC max 
should do it!


Alex

On Sat, 4 Jan 1997, Dave Head wrote:

> At 01:53 PM 1/4/97 PST, you wrote:
> >     
> >     Why would you expect free installation?  Time costs money and so does 
> >     installing radios.  But $30 extra to just bypass an amp is a lot.  
> >     Anyway, in my 5000 the amp is in the trunk mounted to the bottom of 
> >     the rear deck.  I'm no expert on electronics but most amps require a 
> >     low input signal. You can't put an amplified signal into an amp, which 
> >     may be the problem your having.  Find the amp, disconnect the speaker 
> >     wires and run the wires directly to the speakers.
> >     
> 
> Actually, the 5K rear amp is a high input (amped) signal. I expect the
> problem is that Bluapunkt uses a floating ground system, and the Sony (along
> w/everyone else) does not.
> 
> ********************************AUDI FAN***********************************
>                                        EMCM(SW) Dave Head  
> 87 5KCStq 183K miles and counting... 1.8 bar boost - Whee!
>                                               Maitland, Florida
> ******************************************************************************
>