Armrest

["Al Powell" <APOWELL@agcom.tamu.edu>]

I can't speak for the new Audis, but on my 1990 200 the armrest is 
held on by ONE large bolt which sticks out the left rear corner of 
the armrest.  It screws directly into a a threaded hole in the 
driver's seat frame - requiring one hold to be made through the 
leather or fabric on the seat.


IF the installation is similar, two questions:

1)  DOES the seat have the pre-threaded hole?  If not, one would not 
want to experiment with drilling and tapping one.  This is important 
to find out.  Chances are that it does, IF any of the series have an 
armrest.

2)  MAKE SURE you put the hole in the right place.

Doesn't sound very difficult, provided the thing works similarly.



.......................................................
Al Powell, Ph.D.                 Voice:  409/845-2807
107 Reed McDonald Bldg.          Fax:    409/862-1202
College Station, TX 77843      
Http://agcomwww.tamu.edu/agcom/satellit/alpage.htm
.......................................................