[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Center Diff Noise on 4ksq

> I notice that the center 
> diff is much more sluggish to engage/disengage on the urQ too.  I figure 
> it is a combination of an old cable, an old actuator and long vacuum lines 
> along with a little built up torque that makes it want to stay locked.  I 
> find that I sometimes have to help by steering left and right slightly to 
> try to eliminate the binding.  I do not hear any popping sound when the 
> diff finally unlocks ...

I just had mine worked on - replaced the rear vac. lines, lubed and
cleaned the back of the cable (that box thingie) and it works great
now, easy on, easy off :)

| Dan |