[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Source for Parts/Tools

>It is 10mm triple square and it is available for 15USD from your local SnapO
>truck...  I found the cheaper ones don't last as long, but are available....
> It is a serious removal torque and 60ft/lb install torque, so best get a
>good one...  (and 1/2 in drive if you can find it)

and i would suggest seating the tool with a small hammer before
torqueing either way - don't ask me how i figure this out.
skip this step if you are handy with a dremel tool.  =8)

to: IN:QSHIPQ@aol.com
cc: IN:quattro@coimbra.ans.net