[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

5 cyl crank pulley removal

Ok, I know that there's a big scary bolt attaching the pulley to the
crankshaft.  There's also what appears to be the same on the Audi V6.
On the V6, you remove the 8 8mm hex bolts around the big bolt and
the thing comes off.  I noticed on my '88 90Q that there are
4 hex bolts around the big bolt.  What happens when these are removed?
Do these merely hold the pulley and balancer together, but not the 
whole assy to the crank?

just curious...


Steve Valin	http://reality.sgi.com/steve_engr	steve@sgi.com
    		"Time wounds all heels"  -Crackerbash