[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
MAC-10 connector wires-BIGGER Question
Ok, here's the BIGGER question: If I have a California 5ktq and only the
automatic trans boost limiter wire is cut, should I cut the CA emmisions
wire. I live in Oregon and this will never again be a CA car, so will my
performance improve if I cut this wire?
I have a copy of the ecu's code, but am pretty computer language illiterate.
Anyone know exactly what that one state only wire controls?
>> > Hi everybody!
>> I just started looking closely at my MAC-10 unit connector and noticed
>> 2 wires which appear to have been cut/disconnected. I currently don't
>> have Bentley manual, so I was wondering if somebody on the list with
>> manual for 86-88 5000TQ could look up what signals these wires carry.
>> (Below is rough drawing of connector, with wire positions/color
>> 2nd wire from right,top row(brown/white)
>> | |----------------------------|
>> |--| |_______
>> |--| |-------
>> | |____________________________|
>> 6th wire from left, bottom row(brown/blue)
>> Thank You
>> 86' 5000CSTQ
>> 87' 944T
Audi Quattro Fanatic