Re: Brake Help

[mike posner <posne@cts.com>]

At 09:06 PM 5/24/97 -0400, Polidori1@aol.com wrote:
>Q Tech Types:
>
>2 Questions:
>
>1.  Completed the Girling 60 caliper & 11" rotor upgrade on the '87 4Q, but
>am not impressed with the stopping power.  Rotors are new drilled brembos
>being squeezed by MMs.  Any ideas?
>
>2.  With the A/C on full blast, I get warm air.  Fresh re-charge and new
>style rotary compressor.  Guessing that a heater vent is sticking open.  Any
>experience out there?
>
>Duane
>San Diego, CA
>
>Re:#1 Calipers, hoses, and master cyl free and un- plugged ?Vacuum booster
/hoses ok?.
Re: #2 Was system purged, filter -dryer replaced ? Clogged expansion valve?
debris in the condenser are all possible suspects., in addition to the
sticking heater valve.