[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Re[2]: EM JetHot Coatings

The local Jet Hot franchise reccomended that I coat the exhaust manifold ,
down pipe turbo & exhaust back at least as far as where your cat would be.
He also commented that I may have to coat the entire exhaust as the temp
from there back will be much higher than before and may cause probs where
its close to the body.

When I started investigating ceramic coatings, I found a web site for
another ceramic coater (didnt bookmark & cant remember the name). They
claim to have their coatings on something like 17 of the cars at this years
Indy 500.  I'm surprised that Eric didnt mention them.

John Firkins

>Mike, et al
>I am planning to use the fabric between the manafolds and to shield the
>various hoses of the intake system. I am still not clear on the best use of
>ceramic coating such as jet hot. Inside, outside, or both on exhaust manafold
>and down pipe? What about the turbo? Hot side, cold side or both? Will the
>heat go out with the exhaust gas, or heat soak the turbo and head more
>quickly? If hot gas moves faster, will this give quicker spool up? Is the
>down side in the turbo reaching its limit too soon or is it all to the good?
>Just thiking and wondering before taking the leap. Any help out there?