FW: Hood cable on 4KCSQ

[Aleksander Mierzwa <alex@matrix.com.pl>]

> ----------
> From: 	Kwattro@aol.com[SMTP:Kwattro@aol.com]
> Sent: 	7 sierpnia 1997 14:57
> To: 	alex@matrix.com.pl
> Subject: 	Re: Hood cable on 4KCSQ
> 
> In a message dated 97-08-07 05:47:01 EDT, you write:
> 
> << Jeffrey, I don't know if it is of any value to you since I have an
> 5K,
>  but maybe the design of hood lock is similar. My hood cable broke
> under
>  the hood. There are two metal hooks that need to be pulled to open
> the
>  hood. I was able to do this with a wire working throuh the grille. I
>  knew one can learn new things working on the Audi, but I never
> expected
>  burglary is one of them! :-)
>  
>  					Alex
>   >>
> 
> 
> Same is true for a 4000.  Pain to get there, but it can be done.  The
> releases are roughly 8 inches in on either side, with a spring-like
> retainer
> which releases them if you pull it toward you.  Both need to be
> pulled.  Good
> luck!
> 
> Carter J
> Kwattro@aol.com
>