[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Changing clutch.


I've worn off my clutch (90' A80)and decided to change it myself. The
main problem i'm facing to is how to setup the gearbox back to it's
place. Could one advise me some techniqes of doing this. (I just lifted
the front of the car on some king of ramp, so the g/box should be lifted
about half meter over the floor.

I've find out the gearbox weights about 50kg's so it is little hard to
lift it by hand and at the same time slide the shaft into the clutch