[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: how do I remove C-GT cam gear?
> How do I take the cam gear off? The engine is at TDC, and The timing
> belt is already off. How do I hold it still while I remove the bolt? I
> tried using the old timing belt, like an oil filter wrench, but the belt
> started to rip. Any other methods?
> I'm doing my cam right now! The crank bolt was nothing. It's the cam
> bolt I cant get off.
Put a large box end wrench on one of the cam lobes and leverage it against the
side of the head. Then put a 19mm socket on the cam bolt and break it loose with
a 22" breaker bar with a BFCP (Big Friggin' Cheater Pipe)(TM) over it.
'89 200TQ - 18psi (TAP)
'98 A4TQ - on order