[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
No voltage to my fuel pump?
In message <3409C9D9.23AA@mail.steelcity.net> email@example.com writes:
> At the same time while you have the relay out make a jumper to
> bypass the relay(it does not have to be made out of the same size
> terminals because this is just a test,try a paper clip straitened
> out).Insert the clip into the fuse panel no more than 11 mm as a short
> can occur!The terminals to be connected together are 30 and 86 as viewed
> on the relay the pump should run as soon as the connection is made.
I made up a lead with a crocodile clip for the battery positive terminal on one
end, and a simple male spade terminal on the other. With the relay out, this
goes into the longtitudinal relay panel slot nearest the fender.
Committee Member, UK Audi [ur-]quattro Owners Club