[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: A-arm bushings
> Anybody have any good idea's about how to remove and reinstall the a-arm
> bushings on a 4000q?
> We have a press but it does not line up right.
I used a vise (the bench type that you turn by hand) with a looong cheater pipe
for increased pressure, together with short pices of pipe of assorted diameters
to push the bushing and to create space for it to move at the opposite end.
Before pressing in, lubricate both contact surfaces of the bushing and control
arm with silicone spray.