[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Research request (fuel injection)

Phil Payne wrote:

> A number of fuel lines are attached to the _SIDE_ of the metering head.
> These fastenings use banjo bolts ('banto', in Audi English - 'Hohlschrauben' in
> German) that usually have Allen-type heads.  I'm looking for any examples where
> the main feed from the tank (but don't worry if you don't know exactly which
> line that is) is held to the side of the metering head via a normal-looking hex
> headed bolt - especially if a 17mm wrench fits it perfectly.
> Anybody?

The '89 single knock sensor MC engine has all Allen banjos on the side of the 
metering head. Sorry.

Igor Kessel
'89 200TQ - 18psi (TAP)
'98 A4TQ - on order...again. For the third time and counting.
Philadelphia, PA