[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
WOT/Idle Switch Assembly
In message <34825F1A.47E96F6C@poboxes.com> Gerard writes:
> I want to check my WOT/Idle switch assembly. The thing looks sealed
> closed. Does that black plastic cover clip off easily to expose
> the switches within? I pulled the throttle back off idle, there is a
> satisfying "click" as I hear the switch leave idle position, but no
> satisfying "click" is heard when the throttle gets to full (1/2 or
> 2/3 or over) position. Should this be like that?
> Just want to know
> what people normally use to pull the cap of this thing, I don't want
> to stick screwdrivers into the clips only to successfully pop one of
> them off for good. :)
Yup. Just slice through the sealant first with a very sharp knife.
Committee Member, UK Audi [ur-]quattro Owners Club