[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Tool 2069

If the cap is too tight for channel locks try a pipe wrench.  That's
what I used last time and worked like a champ.

Mark P

Date: Fri, 12 Dec 1997 09:57:51 -0500 (EST)
From: bobkunz <bobkunz@earthlink.net>
Subject: Re: Tool 2069
Sender: owner-quattro <owner-quattro@coimbra.ans.net>
To: image_one <image_one@earthlink.net>
Cc: quattro <quattro@coimbra.ans.net>
Message-id: <01IR39UPC8CO9GV84I@dgi0ig.mcimail.com>
Autoforwarded: TRUE
Priority: normal
References: <>

At 03:10 PM 12/11/97 -0800, you wrote:
>Any one in Q-land have a good source for tool 2069 for removing the
>front shocks?

I ended up using the channel lock method for removing the
shocks on my '86 5k. Other than residual tooth marks on the
cap I thought it was just as easy as the tool would have
allowed. You do it from the wheel well rather than the 
top of the shock tower.