[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE:87 CGT clutch hydraulics

You should check to see if any brake fluid is leaking out of trans bell-
housing-if so, you've got a bad slave cylinder (brake master resevoir 
would also be low), most likely a bad master cylinder from previous exp-
eriences. The master cylinder is'nt too bad to replace, the slave can be 
a real tough one due to corrosion ( even in sunny so-cal). Try soaking 
it with a penetrant for a while first. When bleeding clutch, keep fluid
level in brake resevoir as high as possible-the clutch feed is located 
fairly high on side. Good luck.

Ron Wood
Audis a plenty