Lower A arm linkage

[====================================================================== <hmhucks@pams.ncsu.edu>]

Hey everyone,

	My 1987 4000csq had a run in with a curb and need to replace the lower a 
arm on the drivers side.  I haave gotten the inner bushings(pivots) 
disconnected and I also have the camber adjustment bolts out.  I can't 
get the joint or post at the bottom of the strut to come out.  How do I 
disconnect this?  It is the last thing i need to disconnect.  If you have 
any advice on replacing lower arms on the 4000q i will put it to good use!!!

PLEASE REPLEY PERSONALLY TO: hmhucks@eos.ncsu.edu

Thank you in advance,
Bert Hucks

1987 4000CSQ