[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: '94 90CSQ rear mud flaps?

Jouko Haapanen wrote:
> My Votex guide gives PN 8A0 075 101 to fit rear of Audi 80 9/91 on and 80
> Avant 2/92 on.  This is your 90 in North America.  The only thing is that I
> cannot tell from the catalog if the rear flap from the 92/93 fits the 94, as
> the front does not.  There is a widder rubber molding on the sill, and hence
> there is a differen PN for the late model cars' front flaps.  If someone can
> confirm that the rear bumper cover did not change (I don't think it did),
> this would explain why Votex has two different front flaps but only the one
> type of rear flap.

Are you sure that it's not the other way round?
I have just ordered a complete set for my '98 A4. The fiche shows one
type for the fronts and 2 types for the rears (one - for the U.S.
market, the second - the "factory" ones). I have been told that the
reason is the existence of two styles of RR bumpers, Euro one is
slimmer, whereas the U.S. one is beefier.

I ordered all three sets with an option to choose the right one for the
RR of my car.

BTW, in light of the above info, I doubt that the RR guards from a Euro
80 would fit the Nort American 90.

Igor Kessel
'89 200TQ -- 18psi (TAP)
'98 A4TQ -- FINALLY!
Philadelphia, PA