[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Replacing rotors on '93 90CS

Elliott Potter <epotter@abraxis.com> wrote:

> Subject: Replacing rotors on '93 90CS
> I'm going to need to replace the rotors in the front and rear of my 90
> CS, but am having a little trouble figuring out exactly how (there's a
> first time for everything!)  Looking through the repair manual, there
> are detailed instructions on how to replace the pads, but none on how to
> take off the rotors.  I did, however, find some pictures in the axle
> assembly section that looked promising, but they seem a little too
> simple:

If they are anything like my '93 100CSQ (and they probably are), once
you remove the brake caliper, the rotor comes right off.  They only
thing holding it firmly in place are the lug bolts.

I believe my '88 90Q is the same.  I had one rear caliper off when it
was sticking and I seem to recall the rotor hanging loose at that point.


Steve Valin		sjv@netapp.com         408.367.3566