[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Remove (at the electric motor) the push pull metal rod that connects the
electric motor (on the programmer) to the heater door, pull all the way,
should be full hot one way, the other way full cold, listen to the
programmer when changing from hot to cold, if the electric motor "clicks"
the gears are shot (in the electric motor),
At 10:42 AM 1/7/98 -0700, you wrote:
>Plain and simple, the heater pumps out cold air --- and the A/C itself only
>comes out the defrost port. I've taken it to a shop; the guy looked at it
>for 'bout an hour and tested most the electronics...said it was the
>programmer. I already installed a refurbished one--nothing has changed.
- From: David Marble <firstname.lastname@example.org>