[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Replacing rotors on '93 90CS

At 08:00 PM 1/7/98 , Elliott Potter wrote:
One semi-related question: on the front and back axles there should be a
>grease cap which is visible if you take off the little cap on the wheel,
>and this is missing on at least one of the wheels.  Should I replace
>this?  If so, should I pack it with something?

I think you're referring to the wheel bearing cap. They're only on the
rear wheels (and then, only on non-Qs, no?). It's the only thing
keeping dirt/water/etc. out of the wheel bearing, so you may want to

1993 90CS 63k